Is there a minimum number of playlist I should have setup in my iPod?
Yes. It depends on your factory car stereo. Between 5 and 10 depending on how many CDs your factory car stereo can control when it is connected to an external CD Changer. Most external CD Changers support 6 CDs, so 6 playlist should be the minimum. Most of GM vehicles, the external CD Changer can support 9 CDs, so you would need a minimum of 9 playlist. Name the playlist in the following format, 1iCruze, 2iCruze, 3iCruze or 1Classic, 2Rock, 3Jazz etc., so they are the first playlists iCruze "sees" when it connects to your iPod. Please also make sure that you have at least one song per playlist.
How many songs can I access on each playlist through my factory car stereo?
Unlimited. You can store an unlimited amount of songs on your playlists. Due to the limitations of most factory stereos you will only be able to directly access the first 99 songs in any playlist. If you allow the songs to continuously play, then you will be able to listen to more then just the first 99 songs in your playlist, but you will not be able to directly access them.
Will I still be able to use my iPod controls and display once I have connected to iCruze?
No. There are 2 reasons. #1 - It's a driver distraction and could be dangerous. #2 - For the utmost reliable data transfer possible, your iPod is placed into UART (Universal Asynchronous Receiver/Transmitter) mode which prevents the onboard controls/display from functioning.
I don't use a playlist. How do I play my music?
Unfortunately, you will need to set up a playlist in order for iCruze to function correctly.
How do I set up a playlist?
See your iPod owners manual and iTunes setup guide
Will I be able to see the song titles, artist information, or playlist info on my factory radio?
No. Unfortunately the limitations of most factory car stereos do not allow text to be displayed beyond just Disc and Track numbers. Even if your particular factory stereo is capable of text display, iCruze does not support this feature at this time. The iCruze optional auxiliary display has the ability to show Song Title and Artist Information in a convenient, easy-to-read, dash-mountable display.
The iCruze shows My Top Rated, Top 25 Most Played, OnTheGo, etc for my playlists. What's wrong?
iCruze treats those as playlists even though you did not create them. You have either not created playlists or you may have named them incorrectly. Be sure to read the iCruze manual on playlists and then read your iTunes instructions on how to create playlists.
I select disc 6 on my stereo and iCruze seems to lock up. If I select another disc it works, what's going on?
This is similar to the question above. You either do not have a 6th playlist or it is empty. If you did create a 6th playlist, but put nothing in it, the iCruze is simply playing what's there. If your vehicle's head unit can access more than 6, then you should create and put songs into that number of playlists.
How do I control iCruze with my factory car stereo?
The same way that you control your factory CD changer. The CD changer select button now activates iCruze. The buttons that accessed "Discs" in the past now access playlists. The same FF, RW and Random keys that were used for the CD changer, now work for the songs contained on your iPod.
Can I install iCruze myself?
Monster strongly recommends professional installation. In order to install iCruze you should ideally have had past experience with head unit and CD changer installations, as these steps are very similar to what is involved in the installation process for iCruze. You should be familiar with how to remove the dash panels, the factory stereo and other assorted interior panels for your particular vehicle. You will need at least some basic tools which may include: panel removal tool, ratcheting screwdriver set with phillips & flathead bits, ratcheting socket set with assorted sockets, crimping tool kit with crimp connectors or soldering iron, wire strippers/cutters and zip ties.
Will I be able to sort by playlist?
No. Unfortunately the inherent limitations associated with the remote access and control of iPods prevent sorting by playlists.
Will the On-The-Go playlist work on the iCruze?
Yes. As long as the On-The-Go playlist appears as one of the first 6 playlists. On some vehicles, you can control up to ten playlists which means On-The-Go needs to be on the top 10 playlist. iPod arranges the playlist alphabetically so make sure you arrange them as necessary.
There are so many versions of the iPod now. Is mine compatible?
Most likely, yes. Any iPod (including iPod by HP) with a dock connector is compatible. The latest versions including, Nano, Color and Video all have dock connectors. The Shuffle and iPods without a dock connector will not interface with iCruze.
Why do I need to purchase an iCruze module?
The modules translate your car's CD changer language to be able to talk to iCruze. The iCruze uses the same language as Alpine's M-Bus.
I have an Alpine Ai-NET CD player. Will it work with the iCruze?
No. iCruze uses Alpine's M-Bus architecture.
I currently have a factory CD changer installed in my vehicle. Will it still work after iCruze is installed?
No. iCruze needs to plug into that same CD changer port on your factory car stereo. Once iCruze is installed, your factory CD changer is disabled.
I have a factory installed in-dash multi-disc CD changer in my vehicle. Will iCruze work?
In some cases. Most vehicles, with integrated in-dash CD changers (all one unit) typically are NOT compatible because there are no options for an additional external CD changer, therefore there is no place to plug in iCruze. If your vehicle does have an option for an additional external CD changer (i.e. trunk mount), or your vehicle has a separate in-dash CD changer mounted in a separate slot from your main stereo, and can be unplugged in favor of an additional external CD changer (i.e. trunk mount), then iCruze is compatible with your vehicle. Please refer to your vehicle's owner's manual, or your local dealership for clarification as to whether your car stereo is capable of controlling an additional external CD changer.
I don't have a factory CD changer installed in my vehicle, but I've checked with my dealer or I've read in the owner's manual that my factory stereo has the capability of controlling one. Will iCruze work?
I don't see my vehicle listed on the application chart. When will a module be available for my make/model?
New modules are being developed on a regular basis. Check back each month to see which new vehicles are iCruze capable.
The iCruze allows the iPod to charge while connected including after the ignition is turned off. The iCruze will only continue to charge the iPod for one charge cycle and then turn off. If, however, you have a faulty iPod this may cause the iPod to continually draw power from the vehicle while the vehicle is off.
iPod Comm Error
It has been noticed on the iPod photo (with the latest firmware release) that when powering on, it sometimes cannot accept a new Comm link. This is something seen on the older iPods until Apple released a firmware revision to fix it. If this happens, the iCruze LCD will display "iPod Comm Error". The iPod will correct itself if the dock connector is disconnected, and then reconnected.
Will any of my vehicle's factory functions become disabled after I install iCruze
Select vehicles will lose functionality of select features. Select GM models may lose XM Satellite Radio and/or Rear Seat Entertainment control. Please refer to the iCruze online configurator for a complete list of the exceptions that may pertain to your particular vehicle.
iPod Paused after turning on the ignition, or displaying incorrect playlist number
Certain interfaces that mate with the iCruze issue toggle play commands after ignition cycles. The iPod uses a toggle play/pause button to start play of a playlist. Since the interface does not always know the state of the iPod after an ignition cycle, you may find that the iPod will come up after an ignition cycle in the paused state. This is easily remedied by pushing any track or disc access button on the head unit. Also, if your head unit has a play/pause button, you can use that as well to start the iPod. Also, some interfaces/interfaces do not re-check the disc (playlist) number a key cycle. You may find that after a key cycle, the playlist number displayed does not match the playlist currently playing. The track number and the song and artist information on the LCD will be correct, however. This will self correct after some play time, or it can be corrected by pressing any track or disc access button.
iPod in random mode
Certain head units try to control the randomizing process by selecting track numbers and issuing commands to go to specific tracks. This is incompatible with the iPod random process, where the iPod is always in control of the random tracks that it is choosing for playback. Because of that, you may find in some applications while in random mode, that the head unit may get out of sync with the iPod numbering scheme. This will only be an issue when using the remote LCD display and will usually exhibit itself by not displaying the current song and artist title on the LCD display. If this happens, it is easily remedied by pressing the track back button to start the current track again. This will resync the numbering schemes while remaining in random mode.
iPod RESET required
Some iPods can disable serial communications if they are removed from the serial UART connection mid-communication. What this will do is not allow the iPod to reconnect to iCruze. When plugging the iPod into the iCruze with the dock connector, if the LCD stops at MONSTER ICRUZE, and the iPod does not display the iCruze logo, then the iPod needs to be reset. This can be done by pressing both the Menu and select buttons on the face of the iPod for 6 seconds which will bring up the Apple icon on the iPod display and then reset the serial communications in the iPod. The iPod will then connect correctly to the iCruze. This reset can be performed with the iPod connected or disconnected to the iCruze cable.
Will my vehicle's manufacturer's warranty be voided if I install iCruze?
No. It is against the law for your dealership to void your entire warranty because you installed an aftermarket component such as iCruze. Your dealership has the right to void a portion of the warranty that pertains only to the factory car stereo, but the remainder of your warranty remains intact.
I own a GMC vehicle, how do I control iCruze from my radio?
Button 1 - Track Down
Button 2 - Track Up
Button 3 - Quick Cruze (10 tracks down)
Button 4 - Quick Cruze (10 tracks up)
Button 5 - Disc Up
Button 6 - Random
While in Random
3 - Rewind
4 - Fast Forward
What are the dimensions of the iCruze LCD?
Height (w/o base): 1.75"