Monster's unique turbine design allows for maximum contact pressure, contact points and contact mass, all of which are highly important for signal transfer. This design also adds strength and durability. It is often helpful to turn the connector clockwise, to the right, when plugging in or removing the cable.
Multi-Twist construction is a design where the positive and negative conductors within a cable are tightly twisted together causing any external noise or interference to cancel itself out. This design was originally used by Bell Labs during its infancy to run long lengths of cable throughout the country to cancel out noise.
This is a dielectric molding that surrounds the conductor inside the jacket to maintain a 75 ohm resistance load within the cable. to keep a perfect 75 ohm load, there must be equal distance between the conductor and outer shield. to do this, we inject thousands of tiny nitrogen bubbles inside the dielectric that provides a walll between the conductor and shield. Maintaining this resistance is paramount for receiving a clear and precise picture.
No. On the models that contain High Current Filters, we have passed over 21,000 watts of power through to demonstrate its capabilities. For Monster Power Centers that do not have High Current Filters, the fillter becomes saturated for a few Milliseconds but does not impede current flow.
Monster FlatScreen Mounts save space and enable you to safely and securely mount your LCD or plasma TV virtually anywhere in the house, from the kitchen or home office to the master bedroomâ€”wherever you like to watch most. FlatScreen Mounts also feature innovative adjustment features (extension, tilt, and vertical/horizontal adjustment), providing greater viewing flexibility and enjoyment.
Monster has a variety of different mounts for different TV sizes and needs. Only our PerfectView FlatScreen Mounts feature â€śarticulating arms,â€ť allowing the user to extend their TV from their wall and adjust it for optimum viewing. For example, the PerfectView 400S features Z-Fold Extending Swing Arms and Tri-Hinge Construction for 16 inches of extension.
Our all-in-one Monster PowerMounts feature two built-in Monster PowerÂ® AC outlets, both with Clean Power filtering circuitry and SurgeGuard protection. They enable you to mount, adjust, protect and enhance the performance of your flatscreen TV without bulky equipment or added installation expense.
The power from your AC outlets is often polluted with electromagnetic and radio-frequency interference that can degrade your flatscreen TV's performance. Other appliances and electronics in your home often generate this noise and interference. Clean Power circuitry filters out this interference before it can degrade your TV's picture and sound. SurgeGuard suppresses power fluctuations and voltage spikes on the AC powerline before they can damage your flatscreen TV's sensitive electronics.
Different mounts are made for different flatscreen TV sizes. Your mount must support the screen size/weight of your TV. For example, 10â€ť-to-24â€ť LCD TVs require mounts that can support 40 lbs. of weight. Larger 37-to-60â€ť LCD and plasma TVs typically require mounts that can support 200 lbs. of weight.
Also, flatscreen televisions are mountable to different types of surfaces, including wall stud and masonry. Wall-stud mounting means attaching the mount to a wood stud in your wall. Smaller mounts for 10â€ť-to-24â€ť TVs usually require just one wood stud. Larger mounts for 26â€ť-to-37â€ť and 37â€ť-to-60â€ť TVs require two wall studs. Masonry mounting (brick/concrete) requires specialized mounting anchors, as well as special tools and knowledge. Monster recommends hiring a professional installer when mounting to masonry.
Yes. Monster FlatScreen Mounts are universal. They are made for specific flatscreen TV sizes, not particular types of flatscreen TVs. As a result, all Monster FlatScreen Mounts support both LCD and plasma displays.
Display technology (LCD, plasma) is not really a factor in selecting a flatscreen mount. It is critical, however, to choose the correct FlatScreen mount for your TV size and weight. Installing a large LCD or plasma TV, for example, on an undersized mount is reckless and dangerous. If mounting a 26â€ť-to-37â€ť LCD or Plasma, use a Monster FlatScreen SmartView 200M, SmarView 300M (with Tilting V-Bars) or articulating PerfectView 400M. If mounting a larger 37â€ť-to-60â€ť LCD or plasma, use a SmartView 200L or 300L.
In the past, manufactures did make specific mounts for LCD and plasma flatscreen TVs. This is because LCD TVs were generally 10â€ť to 24â€ť in size, while plasmas were larger, ranging in size from 26â€ť to 60â€ť. Today, LCD TVs are available in the same sizes as plasmas, all the
Articulating mounts come in different configurations, but all feature two arms for extending the mount and TV from the wall for enhanced viewing. Additionally, most articulating mounts feature independent arm hinges and joints that enhance the mount's range of motion and adjustment. For example, the PerfectView 400S FlatScreen Mount features Z-Fold Extending Swing Arms and Tri-Hinge Construction, allowing users to swing or pivot the mount 180Â° left or right at three different joint positions.
Tilt/swivel mounts feature a special joint at the mounting plate, enabling the user to tilt their display forward and backward, as well as left and right. Typically, they are designed for 10â€ť-to-24â€ť LCD TVs, mounted to a single wall stud. The SmartView 300S FlatScreen Mount features an All-Directional OmniBall adjustment joint, allowing 360Â° rotation, 20Â° left/right swivel, and +20/-5Â° forward/backward tilt.